-
Smoke Detector Sensor Wireless RF
Smoke sensor is a smoke detector compatible with the Sonoff smart home product family. It connects wireless via Sonoff RF gateway to the eWeLink app that controls Sonoff devices (smart light switch, smart switch relay and smart plugs). Not only does it provide a local light and sound alarm for detected smoke, but it can also send an alarm to a mobile phone via Sonoff RF Bridge and SmartWise RF Bridge.
10,00 $ -
SONOFF DW2 RF Wireless Door / Window Sensor
Sonoff DW2 RF is the successor of the phased out DW1 RF door/window sensor, compatible with Sonoff’s smarthome product line. It can detect and trigger on open event and send alerts to an RF Bridge or directly to a smart relay switch or wall switch with RF receiver.
6,00 $ -
SONOFF DW2 WiFi Wireless Door / Window Sensor
WiFi version of Sonoff’s door/window sensor, fully compatible with Sonoff’s smarthome product line. It connects to the WiFi router directly, so no gateway is required. It can both detect and trigger open and close of the windows and doors and send different type of alerts to your phone or switch other eWeLink-compatible Sonoff and SmartWise devices.
7,00 $ -
SONOFF PIR3 Motion Sensor RF
Sonoff PIR3 is the smart human motion sensor in Sonoff’s smarthome product line, pet motion is not detected. Connects to other Sonoff smart devices – e.g. lights, relays, sockets controlled by the sensor – and eWeLink app wireless, with 433.92 MHz bridge RF (radio frequency) technology via Sonoff RF Bridge gateway.
9,00 $SONOFF PIR3 Motion Sensor RF
9,00 $ -
SONOFF RL560 5M Sensor Extension Cable
5 meter long extension cable for new THS01 Temperature & Humidity Sensor, WST01 waterproof Temperature sensor, and MS01 Soil Moisture Sensor, with RJ9 in and out connectors.
Cable Length: 5 meters (5M)
Connector: RJ9 4P4C
Maximum Extendable Length:
Up to 60 meters for THS01 and DS18B20 sensors
Up to 10 meters for MS01 soil moisture sensors
Conductor Resistance: Max. 10Ω
Insulation Resistance: Min. 5MΩ5,00 $ -
SONOFF Smart Soil Moisture Sensor MS01
Monitor Soil Moisture Works with TH Elite/TH Origin to monitor your plants’ soil moisture.
DIY A Smart Watering Device DIY your sprinkler to water automatically according to the setting moisture value.
IP55 Waterproof IP55 waterproof assure you water flowers freely without taking the sensor out.
Mobile Phone APP support: ewelink
Operating Temp. Range: 0-60°C
Humidity Measuring: 0 ~ 100%RH
Maximum Extended Length: 10m
Waterproof Level: IP5513,00 $ -
SONOFF Water Leak Detection Cable WLDC200
The Sonoff WLDC200 water leakage / flood detection cable is an accessory to the Sonoff SNZB-05P sensor. It can be used to extend the leakage sensor’s detection range from one point to smaller or larger areas. The extension cable can be connected in series without any limit on the total length.
8,00 $ -
SONOFF Zigbee Door/Window Sensor SNZB-04P
Sonoff SNZB-04P is a Zigbee door/window sensor that operates on a battery and uses the Zigbee 3.0 smart home protocol for communication. With the help of a magnetic counterpart, it can signal changes in the status of doors or windows.
Note: SNZB-04P needs to be used with Zigbee Hub.
Mobile Phone APP support: ewelink
Working temperature: -10°C~60°C
Installation distance: ≤20mm
Battery model: CR2477(3V)12,00 $ -
SONOFF Zigbee LCD Smart Temp Humidity Sensor SNZB-02D
Sonoff SNZB-02D is a Zigbee 3.0 smart temperature and humidity sensor with an LCD display. It can be used used to remotely monitor a room’s actual conditions and automatically switch other Zigbee or (even WiFi devices when used with a Zigbee gateway) based on the measured data. Also, measured data can be seen locally on the LCD display.
Note: SNZB-02D needs to be used with Zigbee Hub.
Mobile Phone APP support: ewelink
working temperature: -9.9-60°C
Working humidity: 5-95%RH (non-condensing)
Battery model: CR2450 (3V)
15,00 $ -
SONOFF Zigbee LCD Smart Temperature Humidity Sensor SNZB-02LD
The SNZB-02LD is a Zigbee-compatible smart thermometer with an LCD display, featuring IP65 protection for reliable operation even in humid or splash-prone environments. Its sensor probe is made of 1.5 m stainless steel, which withstands both high and low temperatures. The 2.2-inch LCD screen clearly displays the current temperature in either °C or °F.
Note: SNZB-02LD needs to be used with Zigbee Hub.Mobile Phone APP support: ewelink
working temperature: -10°C~60°C
Probe working temperature: -40°C~115°C
Cable length: 1.5m
Battery model: CR247718,00 $ -
SONOFF Zigbee LCD Smart Temperature Humidity Sensor SNZB-02WD
Sonoff SNZB-02WD is a Zigbee 3.0 smart temperature and humidity sensor with an LCD display. It can be used used to remotely monitor a room’s actual conditions and automatically switch other Zigbee or (even WiFi devices when used with a Zigbee gateway) based on the measured data. Also, measured data can be seen locally on the LCD display.
Note: SNZB-02WD needs to be used with Zigbee Hub.
Mobile Phone APP support: ewelink
working temperature:-20°C~60°C
Working humidity: 0-100%RH
Battery model: CR2477
18,00 $ -
SONOFF Zigbee Wireless door/window sensor SNZB-04
Sonoff Zigbee door window status sensor is a tiny little Zigbee protocol based smart sensor, used to remotely monitor door / window status changes and automatically switch other Zigbee devices or (even WiFi devices when used with a Zigbee gateway) based on the sensor data.
Note: SNZB-04 needs to be used with Zigbee Hub.9,00 $
