eWeLink Lebanon — Devices, Compatibility and Local Setup Support
-
SONOFF TH Elite Smart Temp and Humidity Monitoring Switch
It supports both 230V switching and dry contact NO/NC switching, it can be controlled remotely from a mobile phone via the Internet and can be set for scheduled switching. You may connect temperature and humidity sensor or soil moisture sensor to it, and sensor data based automatic on/off switching and notifications can also be set.
Mobile Phone APP support: ewelink
Dry contact: 5-30V, 1A Max
Working Temperature: -10°C to 40°C
Working Humidity: 5-95% RH, non-condensing
Wireless connectivity: WiFi IEEE 802.11 b/g/n 2.4GHzPrice range: $17.00 through $19.00SONOFF TH Elite Smart Temp and Humidity Monitoring Switch
Price range: $17.00 through $19.00 -
Smart Plug with Power Monitoring
This Plug & Play device can be installed quickly with Bluetooth-based pairing and it can be used to convert a traditional wall socket to a smart socket, and use the eWeLink or Tuya app to remotely turn on/off your smart plug. It syncs on/off status to the app, you may set one-time and repeated scheduled on/offs, timer and loop control, set power-on state (ON / OFF / LAST STATE), and also, auto-on and auto-off (inching) are all supported features.
Voltage: 100-240V 50/60Hz
Max Load: 16A / 4000W
Energy Monitor: Yes
WIFI Standard: 802.11 b/g/n 2.4Ghz Only
Working Temperature: -10°C to 40°C
Voice Control: Works with Alexa / Google Home$8.00 -
SONOFF Basic R2 WiFi Wireless Smart Switch
Sonoff’s entry level smart relay, remotely controllable via Internet and smartphone, WiFi equipped, with timer function, 2200W (10A) peak output.
Mobile Phone APP support: ewelink
Input Voltage: 100-240V AC
Max. Load: 10A / 2200W
Gang: 1-gang (single channel)
Working Temperature: -10°C to 40°C
Working Humidity: 5-95% RH, non-condensing
Wireless connectivity: WiFi IEEE 802.11 b/g/n 2.4GHz$6.00 -
SONOFF TH Origin Smart Temp and Humidity Monitoring Switch
THR316 supports 230V (max. 16A ) switching and it can be controlled remotely from a mobile phone via the Internet and can be set for scheduled switching. You may connect temperature and humidity sensor or soil moisture sensor to it, and sensor data based automatic on/off switching and notifications can also be set.
Mobile Phone APP support: ewelink
Input/Output: 100-240V 16A Max
Working Temperature: -10°C to 40°C
Working Humidity: 5-95% RH, non-condensing
Wireless connectivity: WiFi IEEE 802.11 b/g/n 2.4GHz$15.00 -
SONOFF DUALR3 Dual Relay With Power Metering Smart Switch
Sonoff Dual R3 is 2-gang smart switch relay product version, with power metering feature in a fantastic small size. A flush-mounted WiFi smart dual relay switch module that can be installed behind any standard switch, electric sockets, which is compatible with lights and roller shutters, etc.
Mobile Phone APP support: ewelink
Input: 100-240V AC
Resistive Load: 3300 W total / 2200 W per gang
Motor Load: 10–240 W / 1A
Working Temperature: -10°C to 40°C
Working Humidity: 5-95% RH, non-condensing
Connectivity: WiFi 802.11 b/g/n (2.4 GHz)$14.00 -
SONOFF MINIR2 Two Way Smart Switch
Sonoff’s smallest WiFi smart relay, used to add smart control to an existing 1-gang wall switch or power socket. Can be installed behind traditional wall switches and power sockets. In DIY mode supports integration with other smart home systems via REST API.
Mobile Phone APP support: ewelink
Input / Output Voltage: 100-240V AC
Connectivity: WiFi 2.4 GHz b/g/n$7.00 -
SONOFF MINI Extreme WiFi Smart Switch MINIR4
Sonoff”s tiny little Sonoff Mini Extreme (MINIR4) module is one of the smallest WiFi relays on the market, it has only 33 x 40mm size, so it will fit into even the smallest wall box.
Mobile Phone APP support: ewelink
Input / Output: 100–240 V AC up to 10 A
Maximum Current/Power: 10A, 2400W
WiFi: IEEE 802.11 b/g/n 2.4 GHz
Casing Material: PC V0$10.00 -
SONOFF S60 iPlug WiFi
Transform your home into a smart space with the SONOFF iPlug S60 16A WIFI connected socket (Type F). Easily control your electrical devices remotely via your smartphone and benefit from intelligent energy management. Simplify your daily life with this practical and modern solution.
Mobile Phone APP support: ewelink
Max Load: 16A / 4000W
Input Voltage: 220V
Working Temperature: -10°C to 40°C
Working Humidity: 5-95% RH, non-condensing
Wireless connectivity: WiFi IEEE 802.11 b/g/n 2.4GHz$10.00SONOFF S60 iPlug WiFi
$10.00 -
SONOFF POW Elite Smart Power Meter Switch 20A
Pow Elite R3 bigger version comes with an LCD screen and 20A relay, and of course, a built-in power meter.
6 months of power consumption data (by hour) is stored in eWeLink cloud. As part of the Overload Protection feature, you may set a threshold for power, current, and voltage.
Mobile Phone APP support: ewelink
Input / Output Voltage: 100-240V AC
Maximum Load: 20A
Working Temperature: -10°C to 40°C
Connectivity: WiFi (IEEE 802.11 b/g/n) 2.4GHz
Screen: Clear LCD displays power, current, voltage, and cumulative energy consumption
Data Logging: Stores up to 6 months of hourly power consumption data, exportable to Excel$18.00 -
SONOFF Smart WiFi LED Bulb B05-BL-A60
B05-BL-A60 smart RGBWC WiFi bulb offers remote control and scheduling from app, dimmer / brightness control and white light color temperature setting options, as well as, supports colored light.
Mobile Phone APP support: ewelink
Light Type: RGBCW (RGB + tunable White)
Color Temperature (CCT): 2700K – 6500K
Input Voltage: 230V AC
Luminous Flux: 806 lm
Power: 9W
Base Type: E27$8.00 -
SONOFF DW2 WiFi Wireless Door / Window Sensor
WiFi version of Sonoff’s door/window sensor, fully compatible with Sonoff’s smart home product line. It connects to the WiFi router directly,
Mobile Phone APP support: ewelink
Working Voltage: DC 3V (2×1.5V AAA)
Working temperature: -10°C+40°C
Working Humidity: 5-95% RH, non-condensing
Wireless connectivity: WiFi IEEE 802.11 b/g/n 2.4GHz$7.00 -
SONOFF NFC Tag
Use this Sonoff NFC chip in your eWeLink smart home system. The chip is integrated to an 18mm sticker, put on a plastic card.
You may use it as a portable card, or stick it to the wall or any other place as a sticker.
Mobile Phone APP support: ewelink
Quantity: 2 pcs NFC tag/pack
Capacity: 540 bytes
Size: 18mm diameter$6.00SONOFF NFC Tag
$6.00
eWeLink-branded products at AHS
- Smart Plug with Power Monitoring — $8. 38 reviews at 5.0 — the most-reviewed product in our entire store. The easiest possible starting point: plug it in, plug your appliance into it, and you have app control, scheduling and consumption data.
- 1P WiFi MCB Smart Circuit Breaker — $12, 18 reviews at 5.0. A DIN-rail breaker you can switch remotely — the practical way to control a water heater or pump circuit from your phone.
- eWeLink WiFi Smart Wall Switch — $16, 14 reviews at 5.0.
- eWeLink WiFi DC Relay Smart Switch 5V–32V — $12, 12 reviews at 5.0. A DC relay, which is the piece most shops do not stock. This is what you need for a 12V or 24V circuit — a gate motor controller, a solar or battery-side load, an intercom, a caravan or a small pump.
- WiFi Smart Water Valve — $28, 19 reviews at 5.0. Open and close a water line from your phone, on a schedule — irrigation, or shutting off the mains when you travel.
Every one of these five products carries a 5.0 average rating from real customer reviews. That is unusual, and it is why we keep them in stock.
The much bigger eWeLink range: Sonoff
The eWeLink ecosystem you are probably looking for is Sonoff. We stock over 80 Sonoff lines that all live in the same eWeLink app as the products above — relay modules, TX and M5 wall switches, POW power meters, Zigbee sensors, cameras, hubs, water valves and the NSPanel touch panels. Browse the full Sonoff range at AHS.
What you can actually do with eWeLink
- Remote control — switch anything on or off from anywhere you have a mobile signal.
- Schedules, countdowns and loop timers — run the pump for 20 minutes at 6am, cut the water heater at 11pm.
- Scenes and automations — "when the door sensor opens after dark, turn on the corridor light."
- Sharing — give family members control without giving them your password.
- Energy data — on POW and metering devices, up to six months of consumption history you can export.
- Voice — Amazon Alexa and Google Home.
- Local control — with a Sonoff iHost ($130), automations run on a box in your home with no cloud dependency, so they keep working when the internet does not.
Why this matters in Lebanon
Two realities shape how you should set up eWeLink here.
First, the power. EDL supplies only a few hours a day in most of the country, and a moteur subscription commonly costs $100–$320 a month — with households spending roughly 44% of income on energy. eWeLink's scheduling and energy-monitoring features are not a gadget here; they are how you stop paying for a water heater that runs all night. Start with the $8 metering plug on your single worst offender and see the number for yourself.
Second, the internet. Cloud control needs a connection, and when EDL hands over to the moteur your router reboots along with everything else. Devices reconnect on their own — but if you want automations that never pause, build them locally on an iHost and keep the hub and router on a small UPS. We will happily talk you through the right level of this for your home rather than selling you the biggest one.
WiFi or Zigbee?
The five eWeLink-branded products on this page are all WiFi, 2.4 GHz — no hub required. If you are going beyond ten or so devices, or you want long-life battery sensors, move to Zigbee within the same eWeLink app using a Zigbee Bridge Pro ($22) or Bridge Ultra ($78). Zigbee devices form a mesh that gets stronger as you add more of them.
Works with
eWeLink app (iOS and Android) · Amazon Alexa · Google Home · Home Assistant via the eWeLink add-on · Matter, on Matter-certified models · local control through Sonoff iHost.
Buying from AHS
- Genuine products, AHS warranty and local technical support — ask us for the coverage period on a given model.
- Setup help included. Pairing problems are almost always the 2.4 GHz band or a router setting. Message us on WhatsApp at +961 81 009 594 and we will walk you through it.
- Delivery: same or next day in Beirut and Mount Lebanon, 1–3 business days elsewhere in Lebanon. Flat $4–$5 by area.
- Pay on delivery — cash, OMT or Whish.
- 3-day returns, unused in sealed original packaging, dropped off at our shop at Bldg 4, Unesco, Beirut, return courier at your cost.
eWeLink FAQs
Is the eWeLink app free?
Yes. The app and standard cloud control are free. eWeLink sells optional paid tiers for advanced automation features, but you do not need them for normal use of the devices we sell.
My eWeLink device will not pair. What do I do?
Nine times out of ten it is the WiFi band. eWeLink devices are 2.4 GHz only, and your phone must be on the 2.4 GHz network during pairing. If your router publishes 2.4 and 5 GHz under a single name, split them temporarily or connect the phone to the guest network. Also check that your WiFi password has no unusual characters and that the router is not on AP isolation. Still stuck? WhatsApp us at +961 81 009 594 — we do this every day.
Can eWeLink and Tuya / Smart Life work together?
Not directly — they are separate platforms with separate accounts. The usual solution is to link both to Alexa or Google Home and control everything from there. Some newer devices on both sides support Matter, which is the long-term answer.
Do eWeLink devices keep their state after a power cut?
Yes, and you choose the behaviour. Most eWeLink devices let you set the power-on state to "on", "off" or "last state". In a Lebanese home this is a setting worth thinking about: a water heater is usually best set to "off" after a cut, so it does not fire up unattended when the moteur starts; a router or fridge circuit is best set to "on".
Do I need a hub for eWeLink?
Not for the WiFi devices on this page. You need a hub only for Zigbee devices — a Zigbee Bridge Pro, Bridge Ultra, NSPanel Pro or iHost.
Can I control eWeLink devices without the internet?
Partly. eWeLink has a LAN mode that keeps basic on/off control working on your local network when the cloud is unreachable, and the physical switch always works. For automations that genuinely never depend on the internet, use a Sonoff iHost, which runs everything locally.
Is eWeLink the same as Sonoff?
No, but they belong together. Sonoff is the hardware brand; eWeLink is the app and platform it runs on. eWeLink also supports hardware from other manufacturers, including the eWeLink-branded products on this page.
eWeLink is the app and platform behind Sonoff and a wide range of other smart-home
hardware — and AHS is the Lebanese shop that both sells eWeLink-compatible devices and helps you get
them working. Genuine products, AHS warranty, delivery across Lebanon, and payment on
delivery in cash, OMT or Whish.
A lot of people arrive here looking for the app rather than a product, so let us be clear about
what eWeLink actually is. eWeLink is free software — an app for iPhone and Android
plus a cloud service. It is what you install to control your devices. It is not a device you buy.
What you buy is hardware that speaks eWeLink: Sonoff, plus the eWeLink-branded
switches, relays, breakers and valves on this page.













